AUTODOME 7000 IP
specification
- Day/night IP camera with 28x or 36x optical zoom (12x digital zoom), Wide Dynamic Range (WDR), and Sodium Vapor White Balance mode that restores objects to their original color
- New Intelligent Tracking and alarm rules engine with on-board Intelligent Video Analytics (IVA)
- Enhanced system flexibility with dual recording options (iSCSI, SD card)
- Fully configurable quad streaming with individually configurable SD streams, based on Bosch’s new Common Product Platform (CPP4)
- Easy and intuitive installation with multiple preconfigured user modes that allow users to select the camera configuration that is ideal for their applications
Functions
High-performance PTZ day/night camera
The camera has a 1/4-in. CCD sensor, with 4CIF/D1 resolution and sensitivity to below 1.0 lux, and is available with a choice of 28x and the industry-leading 36x optical zoom lens. Both camera options have a full 12x digital zoom and provide D1 horizontal resolution for outstanding clarity and image detail. The camera also incorporates Wide Dynamic Range (WDR) technology that allows for the capture of clear images from both bright and dark areas in the same frame. WDR ensures that bright areas are not saturated and that dark areas are not too dark. Day/night capabilities and outstanding sensitivity make the camera an exceptional performer in all lighting conditions. In low light, the camera switches automatically from color to monochrome by removing the IR filter to boost the infrared illumination sensitivity, while maintaining superior image quality. For operation in the darkest conditions, the SensUp control feature automatically reduces the shutter speed to as little as one second. This increases sensitivity by more than 50 times.Advanced networking capabilities
The AUTODOME offers advanced capabilities so you can configure the camera to take advantage of the latest networking technology. The AUTODOME offers Quality of Service (QoS) configuration options to ensure fast network response to PTZ data and images. Quality of Service (QoS) is the set of techniques to manage network resources. QoS manages the delay, delay variation (jitter), bandwidth, and packet loss parameters to guarantee the ability of a network to deliver predictable results. QoS identifies the type of data in a data packet and divides the packets into traffic classes that can be prioritized for forwarding. The AUTODOME also supports the IPv6 internet-layer protocol for packet-switched internetworking across multiple IP networks. IPv6 uses 128-bit addresses (IPv4 uses 32-bit addressing), which allows for many more devices and users on the internet as well as extra flexibility in allocating addresses and efficiency for routing traffic.Recording and storage management
A memory card (SD (Secure Digital), SDHC (Secure Digital High Capacity), or SDXC (Secure Digital eXtended Capacity)) can be used for local alarm recording or for scheduled local recording to improve the overall recording reliability. Recording management can be controlled by the Bosch Video Recording Manager (VRM), or the camera can use iSCSI targets directly without any recording software.Fiber Optic Kit
Bosch offers the optional VG4-SFPSCKT, a unique media converter module for use with AUTODOME cameras. This media converter module is designed to accept a wide-range of 10/100 Mbps SFP modules for use with Multimode or Singlemode optical fiber with LC or SC connectors. The media converter module along with the SFP module is user-installed directly into the camera‘s power supply box to provide an integrated fiber optic solution.| Brand Model | AUTODOME 7000 IP | ||||
|---|---|---|---|---|---|
| Electrical | |||||
| In-Ceiling | Pendant | ||||
| Power Consumption, typical | 24 W / 44 VA | 60 W / 69 VA (heaters on) or 24 W / 44 VA3 (heaters off) | |||
| Input Voltage | 21-30 VAC , 50/60 Hz High PoE or PoE+ (IEEE 802.3at, class 4 standard) | 21-30 VAC, 50/60 Hz or High PoE | |||
| Power Consumption, typical | 24 W / 44 VA | 60 W / 69 VA (heaters on) or 24 W / 44 VA3 (heaters off) | |||
| Software Control | |||||
| Camera Setup/ Control | Via web browser (such as Internet Explorer version 7.0 or later), Bosch Configuration Manager, Bosch Video Management System (BVMS), or Bosch Video Client (BVC) | ||||
| Software Update | Network firmware upload | ||||
| Network | |||||
| Video compression | H.264 (ISO/IEC 14496-10), M-JPEG | ||||
| GOP Structure | IP, IBP, IBBP | ||||
| Data Rate | 9.6 kbps to 10 Mbps (per stream) | ||||
| Overall IP Delay | 240 ms | ||||
| Resolution (Horizontal x Vertical, PAL/NTSC) | |||||
| • 4CIF/D1 | 704 x 576/480 (25/30 ips, or 50/60 fields/s for interlaced fields) | ||||
| • CIF | 352 x 288/240 (25/30 ips, or 50/60 fields/s for interlaced fields) | ||||
| Ethernet | 10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45 | ||||
| Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (V1, MIB II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication | ||||
| Advanced Networking | IPv6, QoS | ||||
| Audio | |||||
| • Standard | G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC, 16 kHz sampling rate | ||||
| • Signal-to- Noise Ratio | >50 dB | ||||
| • Audio Streaming | Bidirectional (full duplex) | ||||
| Local Storage | |||||
| Memory Card Slot | User-supplied SD/SDHC/SDXC memory card (maximum 2TB – SDXC) | ||||
| Recording | Continuous recording of video and audio | ||||
| Fiber Optic Kit | |||||
| VG4-SFPSCKT | |||||
| Description | Fiber Optic Ethernet Media Converter kit5. Requires a small form-factor pluggable (SFP) module (sold separately). | ||||
| Data Interface | Ethernet | ||||
| Data Rate | 10/100 Mbps IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port Full Duplex Optical Port | ||||
| Compatible Receiver | CNFE2MC | ||||
| Installation | Installed inside a VG4-A-PA0, VG4-A-PA1, VG4-A-PA2, VG4-A-PSU1, or a VG4‑A‑PSU2 power supply box with supplied mounting hardware | ||||
| SFP Modules | |||||
| Description | Interchangeable modules available for use with MMF or SMF optical fiber. | ||||
| Data Interface | Ethernet | ||||
| Data Rate | 10/100 Mbps IEEE 802.3 Compliant | ||||
| Mechanical | |||||
| Dimensions (LxWxH) | |||||
| • SFP-2 and SFP-3 | 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.) | ||||
| • SFP-25, SFP-26 | 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.) | ||||
| Weight (all SFP modules) | 0.23 kg (.05 lb) | ||||
| Local Storage | |||||
| Internal RAM | 10 s pre-alarm recording | ||||
| Memory card slot | Supports up to 32 GB microSDHC / 2 TB microSDXC card (An SD card of Class 6 or higher is recommended for HD recording) | ||||
| Recording | Continuous recording, ring recording. alarm/events/schedule recording | ||||
| Software Control | |||||
| Unit configuration | Via web browser or PC surveillance software | Network | |||
| Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, SNTP, SNMP (V1, MIB‑II), 802.1x, DNS, DNSv6, DDNS, SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, Digest Authentication. | ||||
| Encryption | TLS 1.0, SSL, DES, 3DES, AES (optional) | ||||
| Ethernet | 10/100 Base-T, auto-sensing, half/full duplex | ||||
| Ethernet connector | RJ45 | ||||
| Connectivity | ONVIF Profile S, Auto-MDIX | ||||
| Mechanical | |||||
| Mounting bracket | 3-axis adjustment | ||||
| Dimensions (L x W x H) | 109 x 65 x 47 mm (4.29 x 2.56 x 1.85 in) | ||||
| Weight (720p version) | 143 g (5.04 oz) approx. | ||||
| Weight (VGA version) | 89 g (3.14 oz) approx. | ||||
| Color | RAL 9017 | ||||
